TA的每日心情 | 开心 昨天 17:00 |
---|
签到天数: 10 天 [LV.3]维修爱好者2级粉丝
新手上路
- 积分
- 140

|
Hello, I have a second motherboard with Gree GRJW843-A5 that has an L3 error code. I have tested all components and replaced the op amp U501 and the fan IPM. As for the components, I did not find any unusual resistors or capacitors in the IPM control and monitoring circuits. And all the lines are connected directly to where they should be. I have the schematic for this motherboard, so I followed it.: R; u+ s9 d4 {
+ C# \3 J* ?( G/ t- S
1 d+ O- c7 w2 A; G Y. {- V' M$ B$ _0 p$ |/ I6 ^6 ?( }8 j9 c C+ \
: S5 X, O6 W/ @6 b6 i$ o% eI also monitored the voltage from R304 to CPU-46 and the voltage from R34 to CPU-17. The voltage from R304 was normal at 3.3V. The voltage from R34 was initially 1.65V and gradually dropped over 30 seconds until the fan started to spin and the voltage dropped to around 1.2V and the fan stopped. After repeating this process 3 times, the AC tester showed L3.0 D. Q# p$ I* l
$ C4 S5 |* C3 ~( f
9 d0 Y, d5 f3 V# }# X
7 I5 Z @! M9 ~7 l
% `9 J* D$ U, l* l; ^
: Y b$ ^: D9 [2 ~/ Y1 G3 x& S" b
& D& g0 S4 y( L$ |# O4 ~I also changed all the capacitors to the values marked on the schematic, but the voltage drop problem persists. Has anyone experienced this with these Gree boards? I think this is an interesting discussion, and it seems to me that these boards are severely affected by the L3 issue. Please let me know what you think and if anyone can help.( c8 ]9 Y; L0 x: ^, E! w5 \" N
7 \. \ q o( f" C8 n n1 s6 I% D
Thanks in advance!!$ |5 X3 ]8 \8 m; d5 F
/ G8 r# t; ^1 u0 a! r7 m5 \# @
8 B% w. z& |4 z* U$ Y6 H
/ V/ M! G) P1 `/ }0 C& Z* e5 U# j |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?邀请码注册
×
|